Quick Reference Guide

QoS Commands 687
Syntax
show diffserv service interface {gigabitethernet unit/slot/port|
tengigabitethernet unit/slot/port
| fortygigabitethernet unit/slot/port}
{in|out}
• in —Show ingress policies.
•
out —Show egress policies.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show diffserv service interface gigabitethernet 1/0/1 in
DiffServ Admin Mode........................... Enable
Interface..................................... 1/0/1
Direction..................................... In
No policy is attached to this interface in this direction.
show diffserv service interface port-channel
Syntax
show diffserv service interface port-channel channel-group {in|out}
• channel-group — A valid port-channel in the system. (Range: 1–18)
•
in —Show ingress policies.
•
out —Show egress policies.
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM200.book Page 687 Tuesday, December 10, 2013 1:22 PM