Quick Reference Guide

570 LLDP Commands
Model Name: xxx xxx xxx
Asset ID: xxx xxx xxx
Location
Subtype: elin
Info: xxx xxx xxx
Extended POE
Device Type: pseDevice
Extended POE PSE
Available: 0.3 Watts
Source: primary
Priority: critical
Extended POE PD
Required: 0.2 Watts
Source: local
Priority: low
show lldp remote-device
Use the lldp remote-device command in Privileged EXEC mode to display
the current LLDP remote data. This command can display summary
information or detail for each interface.
Syntax
show lldp remote-device {detail interface | interface | all}
• detail — Includes detailed version of remote data.
•
interface — Specifies a valid physical interface on the device. Substitute
gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port or
fortygigabitethernet unit/slot/port }
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
2CSNXXX_SWUM200.book Page 570 Tuesday, December 10, 2013 1:22 PM