Quick Reference Guide

564 LLDP Commands
--------- ---- -------- -------- -------- ------- ----
1/0/1 Up Enabled Enabled Enabled 0,1,2,3 Y
1/0/2 Down Enabled Enabled Disabled Y
1/0/3 Down Disabled Disabled Disabled 1,2 N
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System Description, 3 –
System Capability
console# show lldp interface 1/0/1
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
1/0/1 Up Enabled Enabled Enabled 0,1,2,3 Y
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System Description, 3 –
System Capability
show lldp local-device
Use the show lldp local-device command in Privileged EXEC mode to display
the advertised LLDP local data. This command can display summary
information or detail for each interface.
Syntax
show lldp local-device {detail interface | interface | all}
• detail — includes a detailed version of remote data.
•
interface — Specifies a valid physical interface on the device. Specify
either
gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port
or
fortygigabitethernet unit/slot/port.
•
all — Shows lldp local device information on all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Examples
These examples show advertised LLDP local data in two levels of detail.
2CSNXXX_SWUM200.book Page 564 Tuesday, December 10, 2013 1:22 PM