Quick Reference Guide

iSCSI Optimization Commands 543
show iscsi sessions
Use the show iscsi sessions command in Privileged EXEC mode to display the
iSCSI status.
Syntax
show iscsi sessions [detailed]
• detailed — Displayed list has additional data when this option is used.
Default Configuration
If not specified, sessions are displayed in short mode (not detailed).
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The N2000/N3000 Series switches support monitoring for up to 1024
sessions. The N4000 switches support monitoring for up to 512 sessions.
Example
The following examples show summary and detailed information about the
iSCSI sessions.
console#show iscsi sessions
Target: iqn.1993-11.com.disk-vendor:diskarrays.sn.45678
-----------------------------------------------------
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12
ISID: 11
Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
ISID: 222
-----------------------------------------------------
Target: iqn.103-1.com.storage-vendor:sn.43338.
storage.tape:sys1.xyz
Session 3:
Initiator: iqn.1992-04.com.os-vendor.plan9:cdrom.12
Session 4:
Initiator: iqn.1995-05.com.os-vendor.plan9:cdrom.10
Console# show iscsi sessions detailed
Target: iqn.1993-11.com.disk-vendor:diskarrays.sn.45678
2CSNXXX_SWUM200.book Page 543 Tuesday, December 10, 2013 1:22 PM