Quick Reference Guide

IPv6 Access List Commands 507
show ipv6 access-lists
Use the show ipv6 access-lists command in User EXEC and Privileged EXEC
mode to display an IPv6 access list and all of the rules that are defined for the
IPv6 ACL. Use the [
name ] parameter to identify a specific IPv6 ACL to
display.
Syntax
show ipv6 access-lists [ name ]
• name — The name used to identify the IPv6 ACL.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode, Configuration mode and all
Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
ACL Name: ip1
Outbound Interface(s): control-plane
Rule Number: 1
Action......................................... permit
Match All...................................... FALSE
Protocol....................................... 1(icmp)
Committed Rate................................. 32
Committed Burst Size........................... 16
Rule Number: 2
Action......................................... permit
Match All...................................... TRUE
2CSNXXX_SWUM200.book Page 507 Tuesday, December 10, 2013 1:22 PM