Quick Reference Guide

450 GVRP Commands
show gvrp error-statistics
Use the show gvrp error-statistics command in User EXEC mode to display
GVRP error statistics.
Syntax
show gvrp error-statistics [{gigabitethernet unit/slot/port| port-channel port-
channel-number
| tengigabitethernet unit/slot/port | fortygigabitethernet
unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays GVRP error statistics information.
console>show gvrp error-statistics
GVRP error statistics:
----------------
Legend:
INVPROT: Invalid Protocol Id INVATYP: Invalid Attribute Type
INVALEN: Invalid Attribute Length INVAVAL: Invalid Attribute Value
INVEVENT: Invalid Event
Port INVPROT INVATYP INVAVAL INVALEN INVEVENT
---- ------- ------- ------- ------- --------
1/0/1 0 0 0 0 0
1/0/2 0 0 0 0 0
1/0/3 0 0 0 0 0
1/0/4 0 0 0 0 0
2CSNXXX_SWUM200.book Page 450 Tuesday, December 10, 2013 1:22 PM