Quick Reference Guide

Ethernet CFM Commands 427
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console# show ethernet cfm maintenance-points remove level 1
------ ------- ----- ----------------- ---- ----------------- -----------
MEP Id RMEP Id Level MAC VLAN Expiry Timer(sec) Service Id
------ ------- ----- ----------------- ---- ----------------- -----------
1 2 1 00:11:22:33:44:55 10 25 serv1
show ethernet cfm statistics
Use the show ethernet cfm maintenance-points remote command in
Privileged EXEC mode to display the CFM statistics.
Syntax
show ethernet cfm statistics [domain domain-name | level 0-7 ]
• domain —Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
•
level —Maintenance association level
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
2CSNXXX_SWUM200.book Page 427 Tuesday, December 10, 2013 1:22 PM