Quick Reference Guide

Ethernet Configuration Commands 401
Time Since Counters Last Cleared............... 0 day 13 hr 20 min 24 sec
show statistics switchport
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics { interface-id |switchport}
• interface-id —The interface ID. See Interface Naming Conventions for interface
representation.
• switchport —Displays statistics for the entire switch.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
It is possible to enter interface configuration mode from global configuration
mode or from interface configuration mode.
RFC Cross Reference
Textual Explanation RFC 2863 MIB Identifier
Total Packets Received (Octets) ifHCInOctets
Unicast Packets Received ifHCInUcastPkts
Multicast Packets Received ifHCInMulticastPkts
Broadcast Packets Received ifHCInBroadcastPkts
Receive Packets Discarded ifInDiscards
Octets Transmitted ifHCOutOctets
2CSNXXX_SWUM200.book Page 401 Tuesday, December 10, 2013 1:22 PM