Quick Reference Guide

Ethernet Configuration Commands 391
FCS Errors: ................................... 0
Single Collision Frames: ...................... 0
Late Collisions: .............................. 0
Excessive Collisions: ......................... 0
Multiple Collisions: .......................... 0
Received packets dropped > MTU: ............... 0
Transmitted packets dropped > MTU: ............ 0
Internal MAC Rx Errors: ....................... 0
Received Pause Frames: ........................ 0
Transmitted Pause Frames: ..................... 0
Received PFC Frames: .......................... 0
Transmitted PFC Frames: ....................... 0
show interfaces description
Use the show interfaces description command in User EXEC mode to
display the description for all configured interfaces.
Syntax
show interfaces description [gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet
unit/slot/port]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for all interfaces.
console>show interfaces description
Port Description
---- ------------------------------------------------
1/0/1 Port that should be used for management only
2CSNXXX_SWUM200.book Page 391 Tuesday, December 10, 2013 1:22 PM