Quick Reference Guide

E-mail Alerting Commands 369
Default Configuration
The default value for password is admin.
Command Mode
Mail Server Configuration
User Guidelines
This command has no user guidelines.
show mail-server
Use the show mail-server command in Privileged EXEC mode to display the
configuration of all the mail servers or a particular mail server.
Syntax
show mail-server { ip-address | hostname | all}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show mail-server all
Mail Servers configuration:
No of mail servers configured:2
Mail Serqy ver1 configuration:
SMTP server IP Address: 10.131.1.11
SMTP server Port: 465
SMTP server security protocol: tls
2CSNXXX_SWUM200.book Page 369 Tuesday, December 10, 2013 1:22 PM