Quick Reference Guide

DHCP Snooping Commands 339
Command Mode
User EXEC, Privileged EXEC mode, Configuration mode and all
Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface Trusted Log Invalid Pkts
--------- -------- ----------------
1/0/1 Yes No
1/0/2 No Yes
1/0/3 No Yes
1/0/4 No No
1/0/6 No No
show ip dhcp snooping binding
Use the show ip dhcp snooping binding command to display the DHCP
snooping binding entries.
Syntax
show ip dhcp snooping binding [{static | dynamic}] [interface interface-id |
port-channel
port-channel-id ] [vlan vlan-id ]
• static | dynamic —Use these keywords to filter by static or dynamic
bindings.
•
interface-id —The interface for which to show bindings.
•
vlan-id —The number of the VLAN for which to show bindings.
Default Configuration
There is no default configuration for this command.
2CSNXXX_SWUM200.book Page 339 Tuesday, December 10, 2013 1:22 PM