Quick Reference Guide

308 CDP Interoperability Commands
1/0/8 Enabled
1/0/9 Enabled
1/0/10 Enabled
1/0/11 Enabled
1/0/12 Enabled
1/0/13 Enabled
1/0/14 Enabled
1/0/15 Enabled
1/0/16 Enabled
1/0/17 Enabled
1/0/18 Enabled
1/0/19 Enabled
1/0/20 Enabled
1/0/21 Enabled
1/0/22 Enabled
1/0/23 Enabled
1/0/24 Enabled
console#show isdp interface gigabitethernet 1/0/1
Interface Mode
--------------- ----------
1/0/1 Enabled
show isdp neighbors
The show isdp neighbors command displays the list of neighboring devices.
Syntax
show isdp neighbors {[gigabitethernet unit/slot/port | tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port | detail]}
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The information displayed varies based upon the information received from
the ISDP neighbor.
2CSNXXX_SWUM200.book Page 308 Tuesday, December 10, 2013 1:22 PM