Quick Reference Guide

CDP Interoperability Commands 307

Port ID GigabitEthernet1/1

Holdtime 64

Advertisement Version 2

Entry last changed time 0 days 00:13:50

Version :

Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000 I9K91S-M),

Version 12.2(25)EWA9, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 21-Mar-07 12:20 by tinhuang

show isdp interface

The show isdp interface command displays ISDP settings for the specified

interface.

Syntax

show isdp interface {all | gigabitethernet unit/slot/port | tengigabitethernet

unit/slot/port | fortygigabitethernet unit/slot/port}

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC mode, Configuration mode and all Configuration submodes

User Guidelines

There are no user guidelines for this command.

Example

console#show isdp interface all

Interface Mode

--------------- ----------

1/0/1 Enabled

1/0/2 Enabled

1/0/3 Enabled

1/0/4 Enabled

1/0/5 Enabled

1/0/6 Enabled

1/0/7 Enabled

2CSNXXX_SWUM200.book Page 307 Tuesday, December 10, 2013 1:22 PM