Quick Reference Guide

ACL Commands 275
• in — Show the ingress ACLs.
• out — Show the egress ACLs.
• control-plane — Show the control plane ACLs.
Default Configuration
No ACLs are configured by default.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Examples
console#show access-lists interface control-plane
ACL Type ACL ID Sequence Number
-------- ------------------------------- ---------------
IPv6 ip61 1
show ip access-lists
Use the show ip access-lists command in Privileged EXEC mode to display an
IP ACL and time-range parameters.
Syntax
show ip access-lists [ accesslistnumber ]
• accesslistnumber — The number used to identify the IP ACL.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
2CSNXXX_SWUM200.book Page 275 Tuesday, December 10, 2013 1:22 PM