Quick Reference Guide

Administrative Profiles Commands 253
•mode-name— The name of the CLI mode to which the profile will permit
or deny access.
Default Configuration
This command has no default configuration.
Command Mode
Administrative Profile Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(admin-profile)#rule 1 permit command “access-list *”
console(admin-profile)#
show admin-profiles
Use the show admin-profiles command in Privileged EXEC mode to show
the administrative profiles. If the optional profile name parameter is used,
only that profile will be shown.
Syntax
show admin-profiles [name profile-name ]
• profile-name —The name of the administrative profile to display.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The following admin profiles are predefined and may not be deleted or
changed by the administrator:
• Profile: network-admin
2CSNXXX_SWUM200.book Page 253 Tuesday, December 10, 2013 1:22 PM