Quick Reference Guide

User Interface Commands 1765
arp Purge a dynamic or gateway ARP entry.
boot Select a boot image for use on the next reload.
captive-portal Manage captive portal clients.
clear Clear learned configuration or statistics.
configure Enter global Configuration mode.
copy Copy files to or from the switch.
crypto Request a crypto certificate.
debug Configure debug flags.
delete Delete a file.
dir Display directory information.
disconnect Close active remote session(s).
dot1x Initialize dot1x or re-authenticate clients.
enable Enter into user privilege mode.
erase Delete a file.
exit Exit privileged exec mode.
filedescr Set a text description for an image file.
help Display help for various special keys.
locate Blink the locator LED.
logout Exit this session. Any unsaved changes are lost.
ping Send ICMP echo packets to a specified IP address.
quit Exit this session. Any unsaved changes are lost.
release Release an in-band DHCP assigned address.
reload Reload stack or a switch in the stack.
rename Rename a file.
renew Renew an in-band DHCP assigned address.
script Manage and execute configuration scripts.
show Show configured settings and operational status.
telnet Open a telnet connection.
terminal Set per session configuration
test Test a copper port. Disable EEE modes first!.
traceroute Trace route to destination.
udld UDLD protocol commands.
unmount Flush cache and un-mount a USB device.
write Copy running configuration to startup configuration.
console(config-if-Gi1/0/1)#do a? ! Prompt/command completion from
privileged EXEC level
arp
2CSNXXX_SWUM200.book Page 1765 Tuesday, December 10, 2013 1:22 PM