Quick Reference Guide

USB Flash Drive Commands 1759
Command Mode
Privileged EXEC
User Guidelines
Once a flash drive has been unmounted, it must be removed and reinserted in
order to be accessed again.
Example
console#unmount usb
show usb
Use the show usb command in Privileged EXEC mode to display the USB
flash device details.
Syntax
show usb device
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
The following table explains the output parameters.
Parameter Description
Device Status This field specifies the current status of device.
• Active if device is plugged-in and the device is recognized by
the switch.
•
Inactive if device is not mounted.
•
Invalid if device is not present or invalid device is plugged-in.
Manufacturer Manufacturer details
2CSNXXX_SWUM200.book Page 1759 Tuesday, December 10, 2013 1:22 PM