Quick Reference Guide

Command Groups 175
Telnet Server
show system id Displays the service ID information. UE
show system power Displays information about the system level
power consumption.
UE or PE
show system
temperature
Displays information about the system
temperature and fan status.
UE or PE
show tech-support Displays system and configuration information
(for debugging/calls to technical support).
PE
show users Displays information about the active users,
including which profiles have been assigned to
local user accounts and which profiles are active
for logged-in users.
PE
show version Displays the system version information. UE
stack Sets the mode to Stack Global Configuration
mode.
GC
stack-port Sets the mode to Stack Global Configuration
mode to configure Stack ports as either
Stacking ports or as Ethernet ports.
GC
stack-port interface
shutdown
Enables or disable the stack port
administratively.
SC
standby Configures the standby in the stack. SG
switch renumber Changes the identifier for a switch in the stack. GC
telnet Logs into a host that supports Telnet. PE
traceroute Discovers the IP routes that packets actually
take when travelling to their destinations.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
ip telnet server disable Enables/disables the Telnet service on the
switch.
GC
ip telnet port Configures the Telnet TCP port number on the
switch.
GC
Command Description Mode
a
2CSNXXX_SWUM200.book Page 175 Tuesday, December 10, 2013 1:22 PM