Quick Reference Guide

Command Groups 174
slot Configures a slot in the system. GC
show banner Displays banner information. PE
show checkpoint
statistics
Displays the statistics for the checkpointing
process.
PE
show cut-through mode Show the cut-through mode on the switch. PE
show idprom interface
interface-id
Displays the optics EEPRM contents in a user-
readable format.
UE or PE
show interfaces
advanced firmware
Displays the firmware revision of the PHY for a
port.
PE
show interfaces
interface-id
Displays the static and dynamic parameters for
the optics.
UE or PE
show interfaces
utilization
Displays the interface utilization. PE
show memory cpu Checks the total and available RAM space on
the switch.
PE
show nsf Shows non-stop forwarding status. PE
show power-usage-
history
Shows the history of unit power consumption
for the unit specified in the command and total
stack power consumption.
PE
show process cpu Checks the CPU utilization for each process
currently running on the switch.
PE
show sessions Displays a list of the open telnet sessions to
remote hosts.
PE
show slot Displays information about all the slots in the
system or for a specific slot.
UE
show supported cardtype Displays information about all card types
supported in the system.
UE
show supported
switchtype
Displays information about all supported switch
types.
UE
show switch Displays information about the switch status. UE
show system Displays system information. UE
show system fan
Explicitly displays the fan status.
UE or PE
Command Description Mode
a
2CSNXXX_SWUM200.book Page 174 Tuesday, December 10, 2013 1:22 PM