Quick Reference Guide

1708 System Management Commands
show sessions
Use the show sessions command in Privileged EXEC mode to display a list of
the open telnet sessions to remote hosts.
Syntax
show sessions
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays a list of open telnet sessions to remote hosts.
console#show sessions
User Name Connection from Idle Session Time Type
--------- --------------- -------- ------------ --------
EIA-232 00:00:00 00:07:37 Serial
admin 192.168.1.248 00:00:17 00:00:26 Telnet
admin 192.168.1.248 00:00:16 00:00:32 HTTP
console#
The following table describes the significant fields shown in the display.
Field Description
Connection Connection number
Host Remote host to which the switch is connected
through a Telnet session
Address IP address of the remote host
Port Telnet TCP port number
2CSNXXX_SWUM200.book Page 1708 Tuesday, December 10, 2013 1:22 PM