Quick Reference Guide

1702 System Management Commands
Syntax
show interfaces interface-id [transceiver [properties | detail]]
• interface-id —The ID for any valid physical interface.
•
properties —Displays the optics static parameters.
•
detail —Displays the optics static and dynamic parameters.
Default Configuration
This command has no default configuration.
Command Modes
User EXEC, Privileged EXEC modes.
User Guidelines
This command has no user guidelines.
Example
The following example shows static parameters of the optics for a given
interface.
console#show interfaces tengigabitethernet 1/0/9 transceiver properties
Type.............................. SFP+
Media............................. 10GBASE-LRM
Serial Number..................... ANF0L5J
Dell Qualified.................... Yes
The following example shows static and dynamic parameters of the optics for
a given interface.
console#show interfaces tengigabitethernet 1/0/9 transceiver detail
Type.............................. SFP+
Media............................. 10GBASE-LRM
Serial Number..................... ANF0L5J
Dell Qualified.................... Yes
Data Rate......................... 1000
Wavelength........................ 1310
Receive Power..................... -40.000
2CSNXXX_SWUM200.book Page 1702 Tuesday, December 10, 2013 1:22 PM