Quick Reference Guide

Command Groups 168
debug ipv6 pimdm Traces PIMDMv6 packet reception and
transmission.
PE
debug ipv6 pimsm Traces PIMSMv6 packet reception and
transmission.
PE
debug isdp Traces ISDP packet reception and transmission. PE
debug lacp Traces of LACP packets received and
transmitted by the switch.
PE
debug mldsnooping Traces MLD snooping packet reception and
transmission.
PE
debug ospf Enables tracing of OSPF packets received and
transmitted by the switch.
PE
debug ospfv3 Enables tracing of OSPFv3 packets received and
transmitted by the switch.
PE
debug ping Enables tracing of ICMP echo requests and
responses.
PE
debug rip Enables tracing of RIP requests and responses. PE
debug sflow Enables sFlow debug packet trace. PE
debug spanning-tree Traces spanning tree BPDU packet reception
and transmission.
PE
debug vrrp Enables VRRP debug protocol messages. PE
exception core-file Configures the core dump file name. GC
exception dump Configures the core dump location. GC
exception protocol Enables full core dumps. GC
exception switch-chip-
register
Enables the dumping of the switch chip
registers in case of an exception.
GC
show debugging Displays packet tracing configurations. PE
show exception Displays the core dump configuration
parameters.
PE
write core Generates a core file on demand and either,
reboots the switch or tests the core file
configuration.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
2CSNXXX_SWUM200.book Page 168 Tuesday, December 10, 2013 1:22 PM