Quick Reference Guide

Syslog Commands 1655
Default Configuration
The command default is enabled.
Command Mode
Global Configuration
Example
console(config)#logging audit
logging buffered
Use the logging buffered command in Global Configuration mode to limit
syslog messages displayed from an internal buffer based on severity. To cancel
the buffer use, use the no form of this command.
Syntax
logging buffered [ severity–level ]
no logging buffered
• severity–level —(Optional) The number or name of the desired severity
level. Range:
– [0 | emergencies]
– [1 | alerts]
– [2 | critical]
– [3 | errors]
– [4 | warnings]
– [5 | notifications]
– [6 | informational]
– [7 | debugging]
Default Configuration
The default value for level is info.
2CSNXXX_SWUM200.book Page 1655 Tuesday, December 10, 2013 1:22 PM