Quick Reference Guide

1648 Syslog Commands
<190> JAN 10 18:59:17 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 369 %% [CLI:----:EIA-232] Access level of user admin
has been set to 15
If enabled, the CLI command logger subsystem begins to log commands
immediately after the user is authenticated. After authentication, the CLI
generates an explicit message and invokes the command logger. The format of
the message at login is:
<189> JAN 10 18:58:56 10.27.21.22-2 CMDLOGGER[209809328]:
cmd_logger_api.c(83) 361 %% CLI:10.27.21.22:admin:User admin logged in
<190> JAN 10 18:58:56 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 362 %% [CLI:admin:10.27.21.22] User has successfully
logged in
The CLI command log subsystem also logs all user log out instances. The
format of the log message is:
<190> JAN 10 19:01:04 10.27.21.22-2 CLI_WEB[209809328]:
cmd_logger_api.c(260) 382 %% [CLI:admin:10.27.21.22] User has logged out
Commands in this Chapter
This chapter explains the following commands:
clear logging
Use the clear logging command in Privileged EXEC mode to clear messages
from the internal logging buffer.
clear logging logging facility
clear logging file logging on
description (Logging) logging protocol
level logging snmp
logging cli-command logging web-session
logging port
logging audit show logging
logging buffered show logging file
logging console show syslog-servers
– terminal monitor
2CSNXXX_SWUM200.book Page 1648 Tuesday, December 10, 2013 1:22 PM