Quick Reference Guide

SNMP Commands 1629
Syntax
snmp-server location text
no snmp-server location
• text — Character string describing the system location. (Range: 1 to 255
characters.)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the device location as "New_York".
console(config)# snmp-server location New_York
snmp-server user
Use the snmp-server user command in Global Configuration mode to
configure a new SNMP Version 3 user. To delete a user, use the no form of this
command.
Syntax
snmp-server user username groupname [remote engineid-string ] [ { auth-
md5
password | auth-sha password | auth-md5-key md5-key | auth-sha-key
sha-key } [priv-des password | priv-des-key des-key ] ]
no snmp-server user
username
• username — Specifies the name of the user on the host that connects to
the agent. (Range: 1-32 characters.)
•
groupname — Specifies the name of the group to which the user belongs.
(Range: 1-40 characters.)
2CSNXXX_SWUM200.book Page 1629 Tuesday, December 10, 2013 1:22 PM