Quick Reference Guide

Command Groups 162
Line
dos-control tcpfrag Enables TCP Fragment Denial of Service
protection.
GC
ip icmp echo-reply Enables or disables the generation of ICMP Echo
Reply messages.
GC
ip icmp error-interval Limits the rate at which IPv4 ICMP error
messages are sent.
GC
ip unreachables Enables the generation of ICMP Destination
Unreachable messages.
IC
ip redirects Enables the generation of ICMP Redirect
messages.
IC
ipv6 icmp error-interval Limits the rate at which ICMPv6 error messages
are sent.
GC
ipv6 unreachables Enables the generation of ICMPv6 Destination
Unreachable messages.
IC
show dos-control Displays Denial of Service configuration
information.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
exec-timeout Configures the interval that the system waits for
user input.
LC
history Enables the command history function. LC
history size Changes the command history buffer size for a
particular line.
LC
line Identifies a specific line for configuration and
enters the line configuration command mode.
GC
show line Displays line parameters. UE
speed Sets the line baud rate. LC
Command Description Mode
a
2CSNXXX_SWUM200.book Page 162 Tuesday, December 10, 2013 1:22 PM