Quick Reference Guide

1616 SNMP Commands
show trapflags
Use the show trapflags command in Privileged EXEC mode to display the
trap settings.
Syntax
show trapflags [ospf|ospfv3|captive-portal]
• ospf —Display OSPFv2 specific trap settings.
•
ospfv3 —Display OSPFv3 specific trap settings.
•
captive-portal —Display captive-portal specific trap settings.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example #1
console#show trapflags
Authentication Flag......................... Disable
Auto-copy-sw Flag........................... Enable
Dot1q Flag.................................. Enable
Link Up/Down Flag........................... Enable
Maclock violation Flag...................... Enable
Multiple Users Flag......................... Enable
Spanning Tree Flag.......................... Enable
VRRP trap................................... Enable
ACL Traps................................... Enable
----------- ----------------------- ---------
user-view1 1.3.6.1.2.1.1 Included
user-view1 1.3.6.1.2.1.1.7 Excluded
user-view2 1.3.6.1.2.1.2.2.1.*.1 Included
2CSNXXX_SWUM200.book Page 1616 Tuesday, December 10, 2013 1:22 PM