Quick Reference Guide

1502 Management ACL Commands
show management access-list
Use the show management access-list command in Privileged EXEC mode to
display management access-lists.
Syntax
show management access-list [ name ]
• name — A valid access list name. (Range: 1–32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the active management access-list.
console# show management access-list
mlist
-----
permit priority 1 gigabitethernet 1/0/1
permit priority 2 gigabitethernet 2/0/1
! (Note: all other access implicitly denied)
2CSNXXX_SWUM200.book Page 1502 Tuesday, December 10, 2013 1:22 PM