Quick Reference Guide

OSPF Commands 1245
Syntax
router ospf
no router ospf
Default Configuration
OSPF routing is not enabled by default
Command Mode
Global Configuration mode.
User Guidelines
The command prompt changes when the router ospf command executes.
Example
The following example enters into router OSPF mode.
console(config)#router ospf
console(config-router)#
show ip ospf
Use the show ip ospf command to display information relevant to the OSPF
router. This command has been modified to show additional fields.
Syntax
show ip ospf
Syntax Description
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
2CSNXXX_SWUM200.book Page 1245 Tuesday, December 10, 2013 1:22 PM