Quick Reference Guide

1208 OSPF Commands
Default Configuration
Command Mode
Router OSPF Configuration mode.
User Guidelines
Unauthenticated interfaces cannot be configured with an authentication key.
Use the
area virtual-link authentication command on page 1209 to enable
configuration of an authentication key.
Example
The following example establishes a virtual link with a 40-second transmit-
delay interval and default values for all other optional parameters:
router ospf
network 10.50.50.0 0.0.0.255 area 10
area 10 virtual-link 192.168.2.2 transmit-delay 40
The following example establishes a virtual link with MD5 authentication:
router ospf
Parameter Default
area-id No area ID is predefined.
router-id No router ID is predefined.
hello-interval
seconds
10 seconds
retransmit-interval
seconds
5 seconds
transmit-delay
seconds
1 second
dead-interval
seconds
40 seconds
authentication-key
key
No key is predefined.
message-digest-key
key-id md5 key
No key is predefined.
2CSNXXX_SWUM200.book Page 1208 Tuesday, December 10, 2013 1:22 PM