Quick Reference Guide

Command Groups 105
IPv6 ACL
IPv6 MLD Snooping
show hosts Displays the default domain name, a list of
name server hosts, static and cached list of host
names and addresses.
UE
show ip address-conflict Displays the status information corresponding
to the last detected address conflict.
UE or
PE
show ip helper-address Displays the ip helper addresses configuration. PE
show ipv6 dhcp interface
out-of-band statistics
Displays IPv6 DHCP statistics for the out-of-
band interface.
PE
show ipv6 interface out-of-
band
Displays the IPv6 out-of-band port
configuration.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
deny | permit (IPv6
ACL)
Creates a new rule for the current IPv6 access
list.
v6ACL
ipv6 access-list Creates an IPv6 Access Control List (ACL)
consisting of classification fields defined for the
IP header of an IPv6 frame.
GC
ipv6 access-list rename Changes the name of an IPv6 ACL. GC
ipv6 traffic-filter Attaches a specific IPv6 ACL to an interface or
associates it with a VLAN ID in a given
direction.
GC
IC
show ipv6 access-lists Displays an IPv6 access list (and the rules
defined for it).
PE
Command Description Mode
a
ipv6 mld snooping vlan
immediate-leave
Enables or disables MLD Snooping immediate-
leave admin mode on a selected interface or
VLAN.
VC
Command Description Mode
a
2CSNXXX_SWUM200.book Page 105 Tuesday, December 10, 2013 1:22 PM