Quick Reference Guide

IGMP Commands 1019
Syntax
show ip igmp membership [ groupaddr ] [detail]
• groupaddr — Group IP address
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Examples
The following examples display the list of interfaces that have registered in
the multicast group at IP address 224.5.5.5, the latter in detail mode.
console#show ip igmp interface membership 224.5.5.5
console(config)#show ip igmp interface membership 224.5.5.5 detail
show ip igmp interface stats
Use the show ip igmp interface stats command in User EXEC mode to
display the IGMP statistical information for the interface. The statistics are
only displayed when the interface is enabled for IGMP.
Syntax
show ip igmp interface stats vlan vlan-id
• vlan-id — Valid VLAN ID
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM200.book Page 1019 Tuesday, December 10, 2013 1:22 PM