Quick Reference Guide

1016 IGMP Commands
Example
The following example configures version 2 of IGMP for VLAN 15.
console#interface vlan 15
console(config-if-vlan15)#ip igmp version 2
show ip igmp
Use the show ip igmp command in Privileged EXEC mode to display system-
wide IGMP information.
Syntax
show ip igmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide IGMP information.
console#show ip igmp
IGMP Admin Mode............................. Enabled
IGMP Router-Alert check..................... Disabled
IGMP INTERFACE STATUS
Interface Interface-Mode Operational-Status
--------- -------------- ----------------
vlan 3 Enabled Non-Operational
2CSNXXX_SWUM200.book Page 1016 Tuesday, December 10, 2013 1:22 PM