Quick Reference Guide

Command Groups 101
Green Ethernet
GVRP
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
green-mode energy-detect Enables a Dell proprietary mode of power
reduction on ports that are not connected to
another interface.
IC
green-mode eee Enables EEE low power idle mode on an
interface or all the interfaces.
IC
clear green-mode statistics Clears:
• The EEE LPI event count, and LPI duration
• The EEE LPI history table entries
• The Cumulative Power savings estimates
for a specified interface or for all the interfaces
based upon the argument.
PE
green-mode eee-lpi-history Configures the Global EEE LPI history
collection interval and buffer size. This value is
applied globally on all interfaces on the stack.
GC
show green-mode interface-
id
Displays the green-mode configuration and
operational status of the port. This command is
also used to display the per port configuration
and operational status of the green-mode. The
status is shown only for the modes supported on
the corresponding hardware platform whether
enabled or disabled.
PE
show green-mode Displays the green-mode configuration for the
whole system. The status is shown only for the
modes supported on the corresponding
hardware platform whether enabled or disabled.
PE
show green-mode eee-lpi-
history interface
Displays the interface green-mode EEE LPI
history.
PE
Command Description Mode
a
clear gvrp statistics Clears all the GVRP statistics information. PE
2CSNXXX_SWUM200.book Page 101 Tuesday, December 10, 2013 1:22 PM