Specifications
Back to Contents Page
Web Interface
Dell™PowerConnect™3048SystemsUser'sGuide
With web-based management, you can configure the PowerConnect 3048 Fast Ethernet Managed Switch and monitor the system using a web browser.
Most web pages for the switch feature the following buttons:
l Reload — Displays the current values for the system related to the web page that is open.
l Apply — Makes changes to the system and refreshes the page. These changes do not persist past the current session.
l Add — Adds new entries to the system and refreshes the page.
l Remove — Removes selected entries from the system and refreshes the page.
Web Pages
When you connect to the switch with a Web browser, a login screen is displayed (if password protection has been enabled). The user name is always root.
Enter the password to access the switch's management mode. Once the password is entered correctly, the front page will appear.
The following menus are available from the Web interface:
l Home
l System Manager
l Port Manager
l Address Manager
l Spanning Tree
l VLAN and CoS
l Port Trunking
l Port Mirroring
l SNMP
l Multimedia Support
l Statistics
l Save Configuration
Web Pages
Home
System Manager
Port Manager
Address Manager
Spanning Tree
VLAN & CoS
Port Trunking
Port Mirroring
SNMP
Multimedia Support
Statistics
Save Configuration
NOTE: The graphics in this section may differ slightly from the graphics on your computer.
NOTICE: For changes to persist beyond the current session, you must save the new configuration from the Save Configuration page.
NOTE: The default password is switch.