Specifications

l Enabled — The system detects IGMP queries and report packets and manages IP multicast traffic through the switch.
l Disabled — The switch forwards traffic and ignores any IGMP requests.

Statistics
From the Statistics page, you can chart a variety of system data. There are three types of graphs to chose from: Comparison Chart, Group Chart, and History
Chart. All charts have a maximum ceiling of 2
31
-1. When all of the variables are set, click Draw. The following sections outline the settings for each type of
chart.
Comparison Chart
The Comparison Chart compares one type of statistic across all of the ports. You must define the following variables:
l Statistics — The type of system data to be monitored
l Refresh Rate — The time interval between automatic refreshes
l Color — The color setting for the chart

Group Chart
The Group Chart shows all the statistic types for one port. You must define the following variables:
l Port Selection — The port for data to be monitored
l Refresh Rate — The time interval between automatic refreshes
l Color — The color setting for the chart
