Specifications

IP Settings
In the IP Settings page, you can manage the IP-related information about the system. The page includes the following editable fields:
l IP Address
l Default Gateway
l Network Mask
l IP Assignment Mode — Sets whether IP functionality is enabled through manual (static) configuration or set by Dynamic Host Configuration Protocol
(DHCP) or Boot Protocol (BootP).
¡ Manual — Sets static IP address.
¡ BootP — Gets IP address from a BootP server.
¡ DHCP — Gets IP address from a DHCP server.
To save any changes you make in this page for the current session, click Apply. To reset these fields to their current value, click Reload.
For IP address changes to take effect, perform the following steps:
1. From the Save Configuration page, save your changes beyond the current session.
2. Reboot the system from the System Manager/Reset page.
