Dell™ IN1930/IN2030M Monitor User's Guide About Your Monitor Setting Up the Monitor Operating the Monitor Troubleshooting Appendix Notes, Cautions, Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Back to Contents Page About Your Monitor Dell™ IN1930/IN2030M Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability LCD Monitor Quality & Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell™ if anything is missing. NOTE: Some items may be optional and may not ship with your monitor.
l l l Drivers and Documentation media Quick Setup Guide Product Information Guide Product Features The Dell™ IN1930/IN2030M flat panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display. The monitor's features include: ■ IN1930: 47.0 cm (18.5 inches) viewable area display. 1366 x 768 resolution, plus full-screen support for lower resolutions. ■ IN2030M: 50.8 cm (20.0 inches) viewable area display. 1600 x 900 resolution, plus full-screen support for lower resolutions.
Label Description Use 1 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 2 Regulatory rating label Lists the regulatory approvals. 3 VESA mounting holes (100 mm) To mount the monitor. 4 Security lock slot Use a security lock with the slot to help secure your monitor. 5 Dell soundbar mounting brackets To attach the optional Dell Soundbar.
Label Description 1 AC power connector 2 VGA connector Label Description Use 1 AC power connector To connect the monitor pow 2 DVI connector To connect your computer t 3 VGA connector To connect your computer t Use To connect the monitor power cable. To connect your computer to the monitor using a VGA cable. Monitor Specifications The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
15-pin D-Sub connector Pin Number Monitor Side of the 15-pin Side Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 DDC +5 V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock DVI Connector Pin Number 24-pin Side of the Connected Signal Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Fl
22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- Plug and Play Capability You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Da system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.
120 V: 30 A (Max.) 240 V: 60 A (Max.) Inrush current Preset Display Modes The following table lists the preset modes for which Dell guarantees image size and centering: IN1930: Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VESA, 720 x 400 31.5 70.0 28.3 -/+ VESA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.0 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.
l Height 141.50 mm (5.57 inches) 141.50 mm (5.57 inches) l Width 236.33 mm (9.30 inches) 236.33 mm (9.30 inches) l Depth 163.78 mm (6.45 inches) 163.78 mm (6.45 inches) Weight with packaging 3.94 kg (8.69 lb) 4.25 kg (9.37 lb) Weight with stand assembly and cables 3.26 kg (7.19 lb) 3.53 kg (7.78 lb) Weight without stand assembly (For wall mount or VESA mount considerations - no cables) 2.64 kg (5.82 lb) 2.91 kg (6.42 lb) Weight of stand assembly 0.33 kg (0.73 lb) 0.33 kg (0.
Back to Contents Page
Back to Contents Page Appendix Dell™ IN1930/IN2030M Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S.
Back to Contents Page Setting Up Your Monitor Dell™ IN1930/IN2030M monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your graphics adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again.
Back to Contents Page Setting Up Your Monitor Dell™ IN1930/IN2030M monitor If you have a non Dell™ desktop, portable computer, or graphics card In Windows XP: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.
Back to Contents Page Operating the Monitor Dell™ IN1930/IN2030M Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt Power On the Monitor Press the button to turn on the monitor. Using the Front Panel Controls Use the keys on the front of the monitor to adjust the image settings. Front panel Key Description A Use the Preset modes key to choose from a list of preset color modes.
Front panel Key Use the keys on the front of the monitor to adjust the image settings. Front panel Key Description A Use the Up key to adjust (increase ranges) items in the OSD menu. Up B Use the Down key to adjust (decrease ranges) items in the OSD menu. Down C Use the OK key to confirm your selection. OK D Use the Back key to go back to the previous menu.
2. 3. 4. 5. 6. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. To select the highlighted item on the menu press the button again. Press the and buttons to select the desired parameter. Press the button to enter the slide bar and then use the Select the to return to previous menu without accepting current settings or or buttons, according to the indicators on the menu, to make your changes.
Brightness Allows you to adjust the brightness or luminance of the backlight. Press the Contrast key to increase brightness and press the key to decrease brightness (min 0 ~ max 100). Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness first, and adjust contrast only if you need further adjustment. Press the key to increase contrast and press the key to decrease contrast (min 0 ~ max 100).
Auto Adjust Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self current input: Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
Input Source (for IN2030M Use the Input Source menu to select between different video signals that may be connected to your monitor. only) Auto Select VGA DVI-D COLOR SETTINGS Select Auto Select to scan for available input signals. Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source. Use the Color Setting menu to adjust the monitor's color settings.
Input Color Format Preset Modes Allows you to set the video input mode to: l RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter l YPbPr: Select this option if your DVD player supports only YPbPr output. Allows you to choose from a list of preset color modes.
l Standard: Loads the monitor's default color settings. This is the default preset mode. l Multimedia: Loads color settings ideal for multimedia applications. l Movie: Loads color settings ideal for movies. l Game: Loads color settings ideal for most gaming applications. l Text: Loads color settings ideal for office environment. l Warm: Increases the color temperature. The screen appears warmer with a red/yellow tint. l Cool: Decreases the color temperature.
Hue Saturation Allows you to adjust the skin tone of the image. Use or Allows you to adjust the color saturation of the image. Use to adjust the hue from '0' to '100'. or to adjust the saturation from '0' to '100'. Demo Mode You can launch the Demo Mode to identify the monitor display difference between Normal and Enhanced. Reset Color Settings Resets your monitor's color settings to the factory defaults. DISPLAY SETTINGS Use the Displays Settings menu to adjust the monitor's display settings.
Aspect Ratio Adjusts the image ratio as Wide 16:9, 4:3, or 5:4. NOTE: Wide 16:9 adjustment is not required at maximum preset resolution 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) . Horizontal Position Use the or buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+). Vertical Position Use the or buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+). Sharpness This feature can make the image look sharper or softer.
Language Allows you to set the OSD display to one of six languages: English, Spanish, French, German, Simplified Chinese, or Japanese. Menu Transparency Allows you to adjust the OSD background from opaque to transparent. Menu Timer Allows you to set the time for which the OSD remains active after you press a key on the monitor. Use the Menu Lock and keys to adjust the slider in 1 second increments, from 5 to 60 seconds. Controls user access to adjustments.
LCD Conditioning This feature will help reduce minor cases of image retention. If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take some time. LCD Conditioning feature cannot remove severe cases of image retention or burn-in. NOTE: Use LCD Conditioning only when you experience a problem with image retention. The below warning message appears once user selects “Enable" LCD Conditioning.
Factory Reset Resets all OSD settings to the factory preset values. Personalize Select this option allows you to set two shortcut keys. Shortcut Key 1 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source"(for IN2030M only), "Aspect Ratio" and set as shortcut key.
Shortcut Key 2 User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source"(for IN2030M only), "Aspect Ratio" and set as shortcut key.
Reset Personalization Allows you to restore shortcut key to the default setting.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the horizontal and vertical frequency ranges addressable by this monitor. Recommended mode is 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M). You will see the following message before the DDC/CI function is disabled. When the monitor enters the Power Save mode, the following message appears: Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button the following messages will appear depending on the selected input: If VGA or DVI cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 5 minutes if left at this state. or See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: Windows XP: 1. Right-click on the desktop and select Properties.
2. 3. 4. Select the Settings tab. Set the screen resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M). Click OK. Windows Vista® or Windows® 7: 1. 2. 3. 4. Right-click on the desktop and select Personalization. Click Change Display Settings. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the screen resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M). Click OK.
NOTE: The stand base is detached when the monitor is shipped from the factory.
Back to Contents Page Setting Up Your Monitor Dell™ IN1930/IN2030M monitor Setting the display resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) (Maximum) For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) pixels by performing the following steps: In Windows XP: 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3.
Dell™ IN1930/IN2030M monitor User's Guide Setting the display resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M)(Maximum) Information in this document is subject to change without notice. © 2011 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ IN1930/IN2030M Monitor User's Guide Attaching the Stand Connecting Your Monitor Removing the Stand Attaching the Dell Soundbar (Optional) Attaching the Stand NOTE: The stand base is detached when the monitor is shipped from the factory. 1. Assemble the stand riser to stand base. a. Place the monitor stand base on a stable table top. b. Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place. 2.
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two different computers with appropriate video systems.
CAUTION: Do not use with any device other than the Dell Soundbar. To attach the soundbar: 1. Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connect the Soundbar with the DC power connector from the Soundbar Power Adapter. 4. Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.
Back to Contents Page Troubleshooting Dell™ IN1930/IN2030M monitor Self-Test Built-in Diagnostics Common Problems Product Specific Problems Dell Soundbar Problems WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly.
NOTE: Self-test feature check is not available for S-Video, Composite, and Component video modes. Built-in Diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. To run the built-in diagnostics: 1. 2. 3. 4. 5. 6. 7.
l l Auto Adjust via OSD. Adjust brightness & contrast controls via OSD. NOTE: When using 'DVI-D', the positioning adjustments are not available. Horizontal/Vertical Lines Screen has one or more lines l l l l l NOTE: When using 'DVI-D', the Pixel Clock and Phase adjustments are not available. l Reset the monitor to Factory Settings. l Perform Auto Adjust via OSD. l Adjust Phase and Pixel Clock controls via OSD.
as the audio source l l l l l l l l Distorted Sound Other audio source is used l l l l l Unbalanced Sound Output Sound from only one side of Soundbar l l l l l l Low Volume Volume is too low l l l l l Back to Contents Page Confirm that the audio line-in plug is completely inserted into the jack of the sound card. Set all Windows volume controls to their midpoints. Decrease the volume of the audio application. Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
