User Manual

Option Description
10 seconds (default)
15 seconds
30 seconds
1 minute
5 minutes
15 minutes
Never
Touchscreen Controls whether the touchscreen is enabled or disabled. The touch screen option is enabled by default.
Unobtrusive Mode When enabled, pressing Fn+F7 will turn o all light and sound emissions from the system.
Disabled — default
Miscellaneous
Devices
Allows you to enable or disable the following devices:
Enable Camera (default)
Enable Secure Digital (SD) Card (default)
Secure Digital (SD) Card Read-Only Mode
Enable Hard Drive Free Fall Protection (default)
Secure Digital (SD) Card Boot
Video screen options
Option
Description
LCD Brightness Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCD
brightness is independent for battery and AC adapter. It can be set using the slider.
Security screen options
Option
Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password. Deleting the
admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take eect immediately.
Default setting: Not set
System Password Allows you to set, change, or delete the system password.
NOTE: Successful password changes take eect immediately.
Default setting: Not set
Internal HDD-0
Password
Allows you to set, change, or delete the administrator password.
NOTE: Successful password changes take eect immediately.
Default setting: Not set
80 System setup options