User Manual

Option Description
• Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode,
Memory Technology, DIMM A Size, and DIMM B Size
• Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache , HT Capable, and 64-Bit
Technology
• Device Information: Primary HDD, M.2 SATA SSD, M.2 PCIe SSD-0, LOC MAC Address, Video Controller,
dGPU Video Controller, Video BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller,
Wi-Fi Device, Cellular device, and Bluetooth Device
Battery Information Displays the battery status health and whether the AC adapter is installed.
Boot Sequence Allows you to change the order in which the computer attempts to nd an operating system.
• Windows Boot Manager ( Default)
• Boot List Option
• Legacy External Devices
• UEFI (System Default)
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
Enable Attempt Legacy Boot is enabled by default.
UEFI boot path
security
• Always, except internal HDD ( Default)
• Always
• Never
Date/Time Allows you to change the date and time.
System Conguration screen options
Option
Description
Integrated NIC Controls the on-board LAN controller. The option Enable Network Stack is not selected by default.
options:
• Disabled
• Enabled
• Enabled w/PXE (default)
SATA Operation Allows you to congure the operating mode of the integrated SATA hard drive controller.
• Disabled
• AHCI
• RAID On — default
Drives Allows you to enable or disable various drives on board.
• SATA-0 (default)
• SATA-2 (default)
• M.2 PCIe SSD-0 (default)
SMART Reporting Controls whether hard drive errors for integrated drivers are reported during system startup. The option ‘Enable
Smart Reporting’ is not selected by default.
78 System setup options