User Manual

Installing power button board

1 Place the power button board in its slot.

2 Tighten the M2x2 screw that secures the power button board to the system.

3 Ax the adhesive tape to secure the power button board to the system.

4 Secure the adhesive-backed power button board cable to the system and then connect the cable to its connector on the system

board.

5 Install the:

a display assembly

b system fan

c Installing the WWAN card

d Installing the WLAN card

e battery

f base cover

6 Follow the procedure in After working inside your computer.

LCD Bezel

Removing the LCD bezel

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b Removing the WLAN card

c Removing the WWAN card

d display assembly

3 Using a plastic scribe, gently open the bezel by prying from the outer edge of the top side of the display bezel [1] , and then continue

prying the outer edges throughout the system. Lift the bezel away from the system [2].

Removing and installing components