User Manual

a display assembly

b WLAN

c WWAN

d battery

e base cover

6 Follow the procedure in After working inside your computer

Power button board

Removing power button board

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c System fan

d Removing the WLAN card

e Removing the WWAN card

f display assembly

3 To remove the power button board:

a Disconnect the power button board cable from its connector on the system board [1] and peel the adhesive to release it [2].

b Remove the M2x2 screw that secures the power button board to the system [3].

c Remove the adhesive tape that secures the power button cable to the system [4].

d Lift the power button board from the system [5].

Removing and installing components