User Manual

NOTE: Tighten the heat sink screws in sequential order as indicated on the heat-sink.

3 Install the:

a battery

b base cover

4 Follow the procedure in After working inside your computer.

System Fan

Removing the system fan

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

3 To remove the system fan:

a Unroute the eDP cable from the routing channel on the system fan [1]. Disconnect the system fan cable from its connector on

the system board [2].

b Remove the 3 M2.5x5 screws securing the fan to the palmrest [1] and then lift the fan o the computer [2].

Removing and installing components