User Manual

Installing the speakers

1 Place the speakers into the slots on the computer.

2 Ax the adhesive tape to secure the speaker cable to the computer

3 Route the speaker cable through its routing channel.

4 Connect the speaker cable to the connector on the system board.

5 Install the:

a SSD

b battery

c base cover

6 Follow the procedure in After working inside your computer.

Coin cell battery

Removing the coincell battery

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

3 To remove the coin cell:

a Pry the coincell battery until it pops out from its slot [1].

b Lift and remove the coin cell from the system [2].

Removing and installing components