User Manual

Installing the WLAN card

1 Insert the WLAN card into its connector on the system board.

2 Tuck the antenna cables underneath the left display hinge and connect the antenna cables to the WLAN card.

3 Replace the WLAN card holder on the WLAN card.

4 Tighten the M2x3 screw to secure the WLAN card and card holder to the system board.

5 Install the:

a battery

b base cover

6 Follow the procedure in After working inside your computer

WWAN card – optional

Removing the WWAN card

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

3 To remove the WWAN card:

a Remove the M2x3 screw that secures the WWAN metal bracket to the system [1] and then lift and remove the metal bracket o

the WWAN card [2].

b Disconnect the two antenna cables from the WWAN card [3].

Removing and installing components