User Manual

Installing the battery

1 Insert the battery into the slot on the computer.

2 Replace the 5 M2x3 screws to secure the battery to the computer.

NOTE

: The 3-cell battery has only 3 screws.

3 Connect the battery cable to the connector on the system board.

4 Install the:

a base cover

b SIM tray (WWAN models)

5 Follow the procedure in After working inside your computer.

WLAN Card

Removing the WLAN card

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

3 To remove the WLAN card:

a Remove the M2x3 screw that secures the WLAN card holder to the system [1].

b Lift and remove the card holder o the WLAN card [2].

c Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].

d Pull out the WLAN card from its connector on the system board [4].

Removing and installing components