Manualshelf

User's Manual

ManualsBrandsDell ManualsSoftwareDell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950)
28293031323334353637
Configuring Boot From SAN Using iSCSI-Based Dell Storage Arrays
16. Configure the following values for Initiator Parameters:
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS (optional)
• Secondary DNS (optional)
• iSCSI Name (the iSCSI initiator name to be used by the client system)
17. Press <ESC> to return to the Main Menu.
18. In the Main Menu, select 1st Target Parameters and change as follows:
• Connect to Enabled
• IP Address to Target IP Address
• TCP Port and Boot LUN (if different from default settings)
• iSCSI Name to IQN name of Target
NOTE: Do not configure anything under 2nd Target Parameters.
Page 30