Administrator's Guide

Restoring Your Operating System 43
5 Immediately press <F6> if you need to install additional device drivers for the boot device or other devices
and perform the following procedure. If you
do not need to install additional device drivers, go to step 6.
a When prompted, press <s> to select and add any additional devices.
b Insert the device driver diskette into the diskette drive and press <Enter>.
A list of device drivers appears.
c Select the appropriate device driver, and press <Enter>.
Windows Setup loads the appropriate drivers on your system.
d Verify that Windows loaded the correct device driver on your system.
e Repeat step a through step d to install any additional device drivers. Otherwise, press <Enter>
to continue.
A message appears stating that Windows Setup is starting Windows.
6 In the Welcome to Setup window, press <Enter> to continue.
7 If you do not have Console Redirection enabled on your system, go to "Running Custom Setup."
If
Console Redirection is enabled on the system, choose one of the following selections:
•
Express Setup — Automatically configures most of your configuration settings, requiring little
or no user intervention.
To run
Express Setup , press <Enter> and go to "Running Express Setup."
•
Custom Setup — Allows you to customize your system name and networking components,
including TCP/IP and your domain name.
To run
Custom Setup , press <C> and go to "Running Custom Setup."
Running Express Setup
1 When prompted from the Windows Server 2003 Setup screen, enter the administrator password
and press <Enter>.
2 When prompted to confirm the password, re-enter the administrator password and press <Enter>.
3 If the Windows Licensing Agreement window appears, go to step 4.
If the
Windows Licensing Agreement window does not appear, go to step 5.
4 Read the information carefully, and if you agree with all of the information, press <F8> to continue.
A window appears displaying the existing partitions and unpartitioned space on your system’s hard drive.
If you do not agree with the information, press <Esc>. Your system restarts, and Windows is not
installed on your system.
5 Select an available partition to install the operating system and press <Enter>.