Important information

10 Important Information
Table 1-3 lists the minimum BIOS requirements for Execute Disable (XD) and
EIST support.
PERC 2/Si (PE2400) 2.8.1.6098 or later 2.8.0.6085 or later
PERC 2/SC 3.13 or later 6.46.2.32 or later
PERC 2/DC on PE 2300, 4300,
and 6300
1.06 or later 6.46.2.32 or later
PERC 2/DC on PE 2400, 4400,
and 6400
1.06 or later 6.46.2.32 or later
PERC 320/DC 5813 or later 5810 or later
Adaptec U320 SCSI RAID 0 or 1 4.30.4S5 or later 2.0.38.0 or later
Adaptec 39160 3.10 or later 6.4.630.100 or
later
Adaptec 39320/39320A 4.30.1 or later 3.0.0.0 or later
1020/1030 embedded 1.03.23 or later 1.09.11 or later
Cost Effective Raid Controller
(CERC) SATA 2s
N/A 6.0.50.5 or later
CERC SATA 1.5/6CH 4.1.0.7417 or later 4.1.1.7040 or later
CERC ATA 100/4CH 6.67 6.46.2.32 or later
NOTE: The drivers and firmware are located on the Dell PowerEdge Service
and Diagnostic Utilities media or the System Support media, and at the Dell
Support website at support.dell.com.
Table 1-2. Minimum Supported Versions of System Firmware and
RAID Controller Driver (continued)
Product and Supported Platforms Supported Firmware
Version
Supported Driver
Version