Service Manual

Installation Guide 29
b Click Next on the Welcome screen.
3 On the Assign Node Template window:
a Select the node template you created in "Create a Node Template for
iSCSI Boot Nodes" on page 28.
b Select the nodes you want to deploy as iSCSI boot nodes.
c Click Next .
4 On the Initiate Deployment window, click Deploy to initiate iSCSI
deployment.
5 Use the following procedure to determine the correct time to turn on the
iSCSI boot node computers:
a Navigate to Node Management  Nodes  By Health , click
Transitional . All the iSCSI boot nodes you deployed must be listed.
b Navigate to Actions  Tab Actio ns and click Customize .
c In the list of available columns, click Progress , and then click Add .
d Review the Progress column until you see the following entry for all
nodes:
Waiting for iSCSI boot nodes to boot and start
Windows setup.
e After you see the entry for all nodes, turn on the iSCSI boot node
computers.
For additional information on Microsoft Windows HPC Server 2008 R2, see
microsoft.com/hpc.
book.book Page 29 Monday, September 20, 2010 1:36 PM